| SPECIFICATIONS | Unit | VT-11 |
| CAPACITY |
|---|
| Swing over Z way cover | mm(inch) | 350(13.77") |
| Max. turning diameter | mm(inch) | 120 (4.72”) |
| Swing over cross slide | mm(inch) | 120 (4.72”) |
| Max. turning length | mm(inch) | 120 (9.84") |
| TRAVEL |
|---|
| X-axis travel | mm(inch) | 180+20(7.08"+0.78") |
| Z-axis travel | mm(inch) | 250+15(9.84"+0.59") |
| SPINDLE |
|---|
| Type of spindle nose | ISO | A2-5 |
| Chuck diameter | mm(inch) | 150(6”) |
| Spindle bearing inner diameter | mm(inch) | 90 (3.54”) |
| Through spindle hole diameter | mm(inch) | 52 (2”) |
| Through bar capacity | mm(inch) | 42 (1.65”) |
| Spindle drive motor(cont/30min) | KW (Hp) | 7.5 (10) |
| Spindle speed range | rpm | 5000 |
| TURRET |
|---|
| Number of tool stations |
| 8 (SW=220) |
| Turret type |
| STATIC |
| Turret indexing time | sec | 0.9 |
| Shank height of square tool | mm(inch) | 20 (0.78”) |
| Shank diameter for boring bar | mm(inch) | 20 (0.78") |
| FEEDRATE |
|---|
| Rapid traverse rate X-axis | mm/min | 15000 |
| Rapid traverse rate Z-axis | mm/min | 15000 |
| Ballscrew diameter of X-axis | mm(inch) | 25*P5 |
| Ballscrew diameter of Z-axis | mm(inch) | 25*P5 |
| TAILSTOCK |
|---|
| Tailstock travel | mm(inch) | 270 (10.6 ”) |
| Tailstock spindle diameter | mm(inch) | 50(2 ”) |
| Tailstock spindle travel | mm(inch) | 90 (3.54 ”) |
| Taper hole of tailstock spindle |
| MT-3 |
| REMARKS |
|---|
| Coolant pump motor | Kw (Hp) | 0.2 (1/4) |
| Coolant tank capacity | L | 139 |
| Floor space | mm(inch) | 2264*1395(89.1"*59.4") |
| Machine weight | Kg (lb) | 2200(4840) |
KFL系列
